IMG_0519.jpg
IMG_0492.jpg
IMG_0495.jpg
IMG_0539.jpg
IMG_0519.jpg
IMG_0492.jpg
IMG_0495.jpg
IMG_0539.jpg

SnoRax MK.1

$25.00

SnoRax MK.1 was designed to provide you a new way to store your snowboards safely, securely, and conveniently.

What’s included:

  • SnoRax MK.1 upper (2)

  • SnoRax MK.1 lower (2)

  • SnoRax sticker 4”x2” (2)

  • Self-tapping mounting screws (8)*

What you need to install SnoRax MK.1:

  • A space large enough to accommodate a snowboard horizontally.

  • A measuring tape.

  • A marker or pencil to mark your position for the mounts.

  • A 5/16 socket for the self-tapping screws.

    • ***Regardless of the hardware you decide to use, DO NOT over-tighten!***

    • ***Over-tightening can potentially damage the SnoRax MK.1 mounts and lead to a failure of the product. Which would subsequently cause damage to your snowboard and anything underneath it.***

Quantity:
Add To Cart

SnoRax MK.1 was designed to provide you a new way to store your snowboards safely, securely, and conveniently.

What’s included:

  • SnoRax MK.1 upper (2)

  • SnoRax MK.1 lower (2)

  • SnoRax sticker 4”x2” (2)

  • Self-tapping mounting screws (8)*

What you need to install SnoRax MK.1:

  • A space large enough to accommodate a snowboard horizontally.

  • A measuring tape.

  • A marker or pencil to mark your position for the mounts.

  • A 5/16 socket for the self-tapping screws.

    • ***Regardless of the hardware you decide to use, DO NOT over-tighten!***

    • ***Over-tightening can potentially damage the SnoRax MK.1 mounts and lead to a failure of the product. Which would subsequently cause damage to your snowboard and anything underneath it.***

SnoRax MK.1 was designed to provide you a new way to store your snowboards safely, securely, and conveniently.

What’s included:

  • SnoRax MK.1 upper (2)

  • SnoRax MK.1 lower (2)

  • SnoRax sticker 4”x2” (2)

  • Self-tapping mounting screws (8)*

What you need to install SnoRax MK.1:

  • A space large enough to accommodate a snowboard horizontally.

  • A measuring tape.

  • A marker or pencil to mark your position for the mounts.

  • A 5/16 socket for the self-tapping screws.

    • ***Regardless of the hardware you decide to use, DO NOT over-tighten!***

    • ***Over-tightening can potentially damage the SnoRax MK.1 mounts and lead to a failure of the product. Which would subsequently cause damage to your snowboard and anything underneath it.***